Proagro 125 SL

Insecticidal preparation in concentrate form, intended to control of flying insects:
Flies and mosquitoes in rooms.

Use: Insecticidal preparation in concentrate form, intended to control of flying insects: mosquitoes and flies in flats and houses, in rooms of public buildings, and also in rooms of rural farms, livestock buildings (henhouse, cages, rooms for animals) and in warehouses. Product with contact or gastric action.

Category:

Instruction for use:

Process should be made in rooms after noticing pests. Preparation must be used in solution form for spray the surface or by painting method.House flies- used in sun-filled wall surfaces, window areas, lamps, support pillars, waste storage areas unless they are used as fodder. long-bearing pastes places of rubbish storage whether they are not used like animal feed.
Mosquitoes- used in darkish and quiet places, recesses and wall corners.

*Spraying the surface: Making the working liquid in spraying machine container dissolve 250 ml ProAgro 125 SL in
4 liters of lukewarm water stirring precisely. Direct spraying should be done to about 30% of the surface used for spraying. Attention! In case of very high infestation use working liquid in higher concentration: dissolve 300 ml of
preparation ProAgro 125 SL in 4 liters of water.

*Painting the surface: Making the working liquid in other container dissolve 250 ml ProAgro 125 SL in 400 ml of lukewarm water stirring till the liquid is consistent. Next, spread with a brush in places of frequent presence of insects. Before doing it, painted surfaces must be washed off the dust precisely. There is also method to brush boards (from cartoon/polyethylane foil 10×30 cm dimension) and put them in places where files gather, such as warm, sunny walls, window frames, pillars, pen parts, pipes, etc. Avoid places that are liable on draught.

Attention:

*Solution have to be mixed precisely before use. Stirring should be repeated, if process was interrupted for longer than 30 minutes. Liquid should be used directly after preparations or at the same day. Clean apparatus for spraying precisely with warm water. full biocidal effect takes place within 24 hours. Room can be ready to use after drying the surface and ventilation the rooms well. Minimal time of ventilation: 1 hour. After finishing the process, places that had contact with food, should be washed precisely with water and detergent and then, splashed by portable water. After finishing, wash your hands precisely with water and soap.

Label         MSDS